A: To configure multinet:
$ mu config
Multinet network configuration utility v4.1(103)
[reading in maximum configuration from multinet:multinet.exe]
[reading in configuration from multinet:network_devices.configuration]
Net-config>show
Interface adaptrr csr address flags/vector
----------------- ------------- ------------------ ------------------------
Se0 (shared vms ethernet/fddi) -none- -none- -none-
[tcp/ip:192.168.108.101, ip-subnet:255.255.255.0]
[vms device: eza0, link level: ethernet]
Official host name: r2d2.nemonix.com
Timezone: est
Timezone rules: us/eastern
Load ucx $qio driver: true
Load pwip (pathworks) driver: true
$ mu config
Multinet network configuration utility v4.1(103)
[reading in maximum configuration from multinet:multinet.exe]
[reading in configuration from multinet:network_devices.configuration]
Net-config>mod seo
[modifying configuration entry for device "se0"]
Vms device: [ezao] ewao
Link level encapsulation mode: [ethernet]
Bsd railer encapsulation : [disabled]
Ip address: [192.168.108.101]
Ip subnet mask: [255.255.255.0]
Non-standard ip broadcast addresses: [none]
Netware network number: [none]
[se0(shared vms ethernet/fddi): csr=none, flags=%xo]
$
$
$ mu config
Multinet network configuration utility v4.1(103)
[reading in maximum configuration from multinet:multinet.exe]
[reading in configuration from multinet:network_devices.configuration]
Net-config>show
Interface adapter csr address flags/vector
--------------- -------------- -------------------- ----------------------
Se0 (shared vms ethernet/fddi) -none- -none- -none-
[tcp/ip:192.168.108.101, ip-subnet: 255.255.255.0]
[vms device: ewa0, link level: ethernet]
Official host name: r2d2.nemonix.com
Timezone: est
Timezone rules: us/eastern
Load ucx $qio driver: true
Load pwip (pathworks) driver: true
Net-config>
*interrupt*
Reboot system
|
