A: To setup ucx:
$ @ucx$config
tcp/ip network configuration procedure
This procedure helps you define the parameters required to
run digital
Tcp/ip services for openvms on this system
Checking tcp/ip services for openvms configuration
database files
Digital tcp/ip services for open vms configuration
menu
Configuration options:
1. Core environment
2. Client components
3. Server components
4. Optional components
5. Shutdown digital tcp/ip services for openvms
6. Startup digital tcp/ip services for openvms
7. Run tests
A. Configure options 1-3
[e]. Exit configuration procedure
Enter configuration option: 1
Digital tcp/ip services for openvms core environment
configuration menu
Configuration options:
1. Bind resolver
2. Domain
3. Routing
4. Interfaces
5. Time zone
A. Configure options 1-5
[e]. Exit menu
Enter configuration option: 4
Interface configuration
The ethernet device(s) on your system are: eza0:
ewa0:
Start of configuration questions for internet interface zeo.
Zeo is the ethernet device eza0:
Interface: zeo
Ip_addr: 192.168.108.130 netwrk: 255.255.255.0 brdcst: 192.168.108.255
C_addr: c_netwrk: cbrdcst:
Flags:
Receive buffer: 0
*do you want to reconfigure zeo [yes] ? No
Digital tcp/ip services for openvms core environment
configuration menu
Configuration options:
1. Bind resolver
2. Domain
3. Routing
4. Interfaces
5. Time zone
A. Configure options 1-5
[e]. Exit menu
Enter configuration option: e
Digital tcp/ip services for open vms configuration
menu
Configuration options:
1. Core environment
2. Client components
3. Server components
4. Optional components
5. Shutdown digital tcp/ip services for openvms
6. Startup digital tcp/ip services for openvms
7. Run tests
A. Configure options 1-3
[e]. Exit configuration procedure
Enter configuration option: e
Setup 100m/b ethernet files
Reboot system
$ @ucx$config
tcp/ip network configuration procedure
This procedure helps you define the parameters required to
run digital
Tcp/ip services for openvms on this system
Checking tcp/ip services for openvms configuration
database files
Digital tcp/ip services for open vms configuration
menu
Configuration options:
1. Core environment
2. Client components
3. Server components
4. Optional components
5. Shutdown digital tcp/ip services for openvms
6. Startup digital tcp/ip services for openvms
7. Run tests
A. Configure options 1-3
[e]. Exit configuration procedure
Enter configuration option: 1
Digital tcp/ip services for openvms core environment
configuration menu
Configuration options:
1. Bind resolver
2. Domain
3. Routing
4. Interfaces
5. Time zone
A. Configure options 1-5
[e]. Exit menu
Enter configuration option: 4
Interface configuration
The ethernet device(s) on your system are: eza0:
ewa0:
Start of configuration questions for internet
interface zeo.
Zeo is the ethernet device eza0:
Interface: zeo
Ip_addr: 192.168.108.130 netwrk: 255.255.255.0 brdcst: 192.168.108.255
C_addr: c_netwrk: cbrdcst:
Flags:
Receive buffer: 0
*do you want to reconfigure zeo [yes] ? No
start of configuration questions for internet
interface weo.
Weo is the ethernet device ewa0:
Interface: weo
Ip_addr: 192.168.108.130 netwrk: 255.255.255.0 brdcst: 192.168.108.255
C_addr: cnetwrk: cbrdcst:
Flags:
Receive buffer: 0
*do you want to reconfigure weo [yes]?
Enter unquailified host name [lab130]:
Host lab130 exists in the database.
Addresses which have been assigned to another
interface are flagged with "*", and cannot be assigned
to the interface
The internet address for this host is:
*192.168.108.130
Enter internet address [192.168.108.130] : 192.168.108.131
Enter internet network mask for lab130 [255.255.255.0]:
Enter broadcast mask for lab130 [192.168.108.255]:
The following parameters will be used to define
the internet interface
Weo:
Host name: lab130
Internet address: 192.168.108.131
Network mask: 255.255.255.0
Broadcast mask: 192.168.108.255
Is the above correct [yes]?
End of configuration questions for internet
interface weoDigital tcp/ip services for openvms core environment
configuration menu
Configuration options:
1. Bind resolver
2. Domain
3. Routing
4. Interfaces
5. Time zone
A. Configure options 1-5
[e]. Exit menu
enter configuration option:
Digital tcp/ip services for open vms configuration
menu
Configuration options:
1. Core environment
2. Client components
3. Server components
4. Optional components
5. Shutdown digital tcp/ip services for openvms
6. Startup digital tcp/ip services for openvms
7. Run tests
A. Configure options 1-3
[e]. Exit configuration procedure
Enter configuration option: e
Next step:
Setting up ucx/nfs
The first thing you need to do is go into ucx
and do a show proto udp/para
Return and it will show you the quota for the receive and
send buffer and
There will be your value for your machien right now. Then,
do a set proto
Udp/quota=sen=42000. Now do a show proto udp/param receive
and transmit
Quoto should be set to 42000. Exit out of ucx and reboot.
|
