Nemonixô Engineering, Inc. 84 October Hill Road, Holliston, MA 01746
Phone: 800-435-8650 / 508-429-3660 Fax: 508-429-3338
Electronic mail: info@nemonixengineering.com
Website: www.nemonixengineering.com

Q:HOW DO I SETUP A LAT SERVER?

A:HOW TO SETUP A LAT SERVER

1.)  INSTALL THE ETHERNET SOFTWARE FILES
2.)  REBOOT SYSTEM AS NORMAL
3.)  LOG INTO SYSTEM ACCOUNT AT PROMPT DO A "SHOW DEVICE E"  RECORD RESULTS
4.)  START LATCP PROGRAM "MC LATCP" AT PROMPT DO A "SHOW LINK" RECORD 
      RESULTS
5.)  ID RESULTS OF STEP 4 HAS DEVICE NAME AS EWAN: THEN PROCEED AS FOLLOWS
6.)  EDIT SYS$MANAGER:STARTUP_VMS.COM LOCATE LINE 
     (@SYS$STARTUP:LAT$STARTUP.COM )INSERT THE FOLLOWING LINE ABOVE IT 
7.)$DEFINE/SYSTEM LAT$DEVICE EZA (THIS IS WHERE YOU DEFINE ETHERNET TO RUN 
      ON. NOTE FOR 100MB USE EWA  
8.)  REBOOT SYSTEM AND VERIFY LAT WORKS
     AN EXAMPLE FOLLOWS
$! START LAT
$!
$ DEFINE/SYSTEM LAT$DEVICE EZA(THIS IS WHERE YOU DEFINE ETHERNET TO RUN ON 
. NOTE FOR 100MB USE EWA
$@SYS$STARTUP:LAT$STARTUP.COM
$!
NOTE IF EWA IS USE FOR LAT
LOOK AT MOM$LOAD:DSV$CONFIGURE 
THIS LOAD THE DECSERVER SET IT LOAD OFF THE EWA