Nemonixô Engineering, Inc. 84 October Hill Road, Holliston, MA 01746
Phone: 800-435-8650 / 508-429-3660 Fax: 508-429-3338
Electronic mail: info@nemonixengineering.com
Website: www.nemonixengineering.com

HOW TO SETUP DECNET PLUS: 

$ TYPE NET$CSMACD_STARTUP.NCL
!% NET$CONFIGURE.COM CREATED-
!% NCL SCRIPT SYS$SPECIFIC:[SYSMGR]NET$CSMACD_STARTUP.NCL;
!% 19-JUNE-2001 15:18:24.10
!%
CREATE NODE 0 CSMA-CD
CREATE NODE 0 CSMA-CD STATION CSMACD-0 COMMUNICATION PORT = EZA
ENABLE NODE 0 CSMA-CD STATION CSMACS-0
$
$ SHOW DEVICE E MACHIEN WILL RESPONDS WITH E?? EWA
TO CONFIGURE DECNET PLUS TO RUN ON 100M/B ADAPTOR 
$ EDIT NET$CSMACD_STARTUP.NCL
!% NET$CONFIGURE.COM CREATED-
!% NCL SCRIPT SYS$SPECIFIC:[SYSMGR]NET$CSMACD_STARTUP.NCL;
!% 19-JUNE-2001 15:18:24.10
!%
CREATE NODE 0 CSMA-CD
CREATE NODE 0 CSMA-CD STATION CSMACD-0 COMMUNICATION PORT = EZA [EZA0 IS 
THE OLD 10M/B ADAPTOR REPLACES WITH EWA]
ENABLE NODE 0 CSMA-CD STATION CSMACS-0
$ CONTROL Z TO EXIT
$ 
$ TYPE NET$CSMACD_STARTUP.NCL
!% NET$CONFIGURE.COM CREATED-
!% NCL SCRIPT SYS$SPECIFIC:[SYSMGR]NET$CSMACD_STARTUP.NCL;
!% 19-JUNE-2001 15:18:24.10
!%
CREATE NODE 0 CSMA-CD
CREATE NODE 0 CSMA-CD STATION CSMACD-0 COMMUNICATION PORT = EWA
ENABLE NODE 0 CSMA-CD STATION CSMACS-0

REBOOT YOUR SYSTEM THIS WILL ENABLE THE 100M/B ETHENET AS YOUR PRIMARY 
ETHERNET CONTROLLER. 
IF YOU WISH TO SETUP YOUR NETWORK WITH TWO NETWORK ADAPTORS, RUN 
NET$CONFIG AND ANSWER THE QUESTIONS AND WHEN IT RESPONDS WITH IS THIS AN 
ENNODE OR ROUTER, SAY ITS A ROUTER. FINISH ANSWERING ALL QUESTIONS.
$ TYPE NET$CSMACD_STARTUP.NCL
!% NET$CONFIGURE.COM CREATED
!% NCL SCRIPT SYS$SPECIFIC:[SYSMGR]NET$CSMSCD_STARTUP.NCL;
!% 19-JUNE-2001 10:46:40.95
!%
CREATE NODE 0 CSMA-CD
CREATE NODE 0 CSMA-CD STATION CSMACD-1 COMMUNICATION PORT = EWA
ENABLE NODE 0 CSMA STATION CSMACD-1
CREATE NODE 0 CSMA-CD STATION CSMACD-0 COMMUNICATION PORT = EZA
ENABLE NODE 0 CSMA-CD STATION CSMACD-0



DECNET PLUS SETUP
$ TYPE NET$CSMACD_STARTUP.NCL
!% NET$CONFIGURE.COM CREATED-
0 CSMA-CD STATION CSMACD-0 COMMUNICATION PORT = EZA
ENABLE NODE 0!% NCL SCRIPT SYS$SPECIFIC:[SYSMGR]NET$CSMACD_STARTUP.NCL;
!% 19-JUNE-2001 15:18:24.10
!%
CREATE NODE 0 CSMA-CD
CREATE NODE CSMA-CD STATION CSMACD-0
$
$ SHOW DEVICE E MACHINE WILL RESPOND WITH E?? EWA
TO CONFIGURE DECNET PLUS TO RUN ON 100M/B ADAPTER 
$ EDIT NET$CSMACD_STARTUP.NCL
!% NET$CONFIGURE.COM CREATED
0 CSMA-CD STATION CSMACD-0 COMMUNICATION PORT = EZA [EZA IS THE OLD ADAPTOR 
CHANGE THIS TO EWA. THIS WILL ENABLE THE 100M/B ETHERNET CARD TO RUN AS 
NETWORK ADAPTOR.]
ENABLE NODE 0!% NCL SCRIPT SYS$SPECIFIC:[SYSMGR]NET$CSMACD_STARTUP.NCL;
!% 19-JUNE-2001 15:18:24.10
!%
CREATE NODE 0 CSMA-CD
CREATE NODE CSMA-CD STATION CSMACD-0
$ CONTROL Z TO EXIT
$ 
$ TYPE NET$CSMACD_STARTUP.NCL
!% NET$CONFIGURE.COM CREATED-
0 CSMA-CD STATION CSMACD-0 COMMUNICATION PORT = EWA
ENABLE NODE 0!% NCL SCRIPT SYS$SPECIFIC:[SYSMGR]NET$CSMACD_STARTUP.NCL;
!% 19-JUNE-2001 15:18:24.10
!%
CREATE NODE 0 CSMA-CD
CREATE NODE CSMA-CD STATION CSMACD-0
$
REBOOT YOUR SYSTEM THIS WILL ENABLE THE 100M/B ETHENET AS YOUR PRIMARY 
ETHERNET CONTROLLER. 
IF YOU WISH TO SETUP YOUR NETWORK WITH TWO NETWORK ADAPTERS, RUN 
NET$CONFIG AND ANSWER THE QUESTIONS AND WHEN IT RESPONDS WITH IS THIS AN 
ENNODE OR ROUTER, SAY ITS A ROUTER. FINISH ANSWERING ALL QUESTIONS.