Nemonixô Engineering, Inc. 84 October Hill Road, Holliston, MA 01746
Phone: 800-435-8650 / 508-429-3660 Fax: 508-429-3338
Electronic mail: info@nemonixengineering.com
Website: www.nemonixengineering.com

INSTRUCTIONS TO UPDATE FIRMWARE FOR NXSCSI BOOT

1.  SHUTDOWN OPERATING SYSTEM USING STANDARD PROCEDURE.

2.  INSERT TAPE SUPPLIED INTO TAPE DRIVE/CDROM

3.  LOAD TAPE/CDROM

4.  AT THE CONSOLE PROMPT ( >>> ) TYPE THE FOLLOWING            
	BOOT/100 mka500:

NOTE: MKA500 IS AN EXAMPLE PLEASE USER CORRECT DRIVE NAME 
FOR YOUR CONFIGURATION.

5.  WHEN THE TAPE/CDROM HAS FINISHED BOOTING IT WILL PROMPT 
	YOU BOOTFILE:
NOTE: FOR VAX 31/41 SYSTEM
SYSBOOT41_V26.XL (CLOCK ONLY)
SYSBOOT41_V26.XLC (CACHE)
SYSBOOT41_V26.M (MEMORY)
SYSBOOT41_V26.XLCM (CACHE & MEMORY)

NOTE FOR VAX 4500A, 4600A, 4700, 4705
 SYSBOOT_70.EXE

6.  YOU WILL BE ASKED IF YOU WISH TO CONTINUE. TYPE YES FOLLOWED
	BY A RETURN.

7.  WHEN COMPLETED CONTROL WILL RETURN TO THE CONSOLE 
	PROMPT. AT THIS POINT TURN POWER OFF THEN BACK ON.

8.  REBOOT THE SYSTEM
COPY SYSLOA FILE TO SYSTEM DISK [SYS$LDR]
	NOTE FOR VAX 31/41 SYSTEM
	DIRECTORY [SYSLOA-3141]
	NOTES FOR VAX 4500A,4600A,4700,4705
	DIRECTORY [SYSLOA700]
9.	BACK/IMAG SYSTEM DISK TO NXSCSI DISK
	
10.	SHUT DOWN OPERATING SYSTEM

11.	BOOT DKW999 WILL SHOW THE DISK ON NXSCSI CONTROLLER

12.	BOOT DKW? THE DISK THAT HAS THE OPERATING SYSTEM ON IT